xosm-57 www.vishay.com vishay dale revision: 26-apr-13 1 document number: 35028 for technical questions, contact: frequency@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount oscillator the xosm-57 series is an ultra miniature package clock oscillator with dimensions 7.0 mm x 5.0 mm x 1.9 mm. it is mainly used in portable pc and telecommunication devices and equipment. features ? size: 7.0 x 5.0 x 1.9 (mm) ? miniature package ? tri-state enable/disable ? ttl/hcmos compatible ? tape and reel ?i r re-flow ? 5 v input voltage ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note (1) include: 25 c tolerance, operating temperature range, in put voltage change, aging, load change, shock vibration note ? a 0.01 f bypass capacitor should be placed between v dd (pin 4) and gnd (pin 2) to minimize power su pply line noise standard electrical specifications parameter symbol condition value frequency range f o - 1.500 mhz to 100.000 mhz frequency stability (1) all conditions 25 ppm, 50 ppm, 100 ppm operating temperature range t opr - 0 oc to 70 oc - 40 oc to + 85 oc (option) storage temperature range t stg - - 55 oc to + 125 oc power supply voltage v dd - 5.0 v 10 % aging (first year) 25 oc 3 oc 5 ppm supply current i dd 1.500 mhz to 20.000 mhz 20 ma max. 20.001 mhz to 50.000 mhz 35 ma max. 30.001 mhz to 100.000 mhz 45 ma max. output symmetry sym at 1 / 2 v dd 40 %/60 % (45 %/55 % option) rise/fall time t r /t f 1.500 mhz to 67.000 mhz 10 ns 67.001 mhz to 100.000 mhz 3 ns output voltage v oh - 90 % v dd min. v ol - 10 % v dd max. output load 1.500 mhz to 67.000 mhz 10 ttl or 50 pf max. 67.001 mhz to 100.000 mhz 15 pf max. start-up time t s - 10 ms max. pin 1, tri-state function - pin 1 = h or open (out put active at pin 3) pin 1 = l (high impedance at pin 3) dimensions in inches [millimeters] pin #1 #2 #3 #4 connection tri- s tate/nc g nd output v dd 0.075 [1.90] max. #4 #3 #1 #2 0.055 [1.40] typ. 0.2 [5.08] typ. 0.200 [5.08] 0.079 [2.0] 0.165 [4.20] 0.071 [1.8] 0.197 0.008 [5.0 0.2] 0.276 0.008 [7.0 0.2] 0.102 [2.60] typ. 0.047 [1.20] typ.
xosm-57 www.vishay.com vishay dale revision: 26-apr-13 2 document number: 35028 for technical questions, contact: frequency@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information xosm-57 b r e 50m e4 model frequency stability otr enable/disable frequency/mhz jedec lead (pb)-free aa = 0.0025 % (25 ppm) a = 0.005 % (50 ppm) b = 0.01 % (100 ppm) standard blank = standard r = - 40 c to + 85 c e = disable to tr i-state standard global part number xo5 7 c t e c na 5 0m model frequency stability otr enable/ disable package code options frequency global part numbering options xo5 7 c t e c n a 4 0 m model number frequency stability operating temperature (otr) enable/ disable package code option frequency xo63 = xosm-533 xo62 = xosm-532 xo61 = xosm-531 xo57 = xosm-57 xo37 = xosm-573 xo27 = xosm-572 xo17 = xosm-571 c = 0.01 % (100 ppm) d = 0.005 % (50 ppm) e = 0.0025 % (25 ppm) t = 0 c to + 70 c r = - 40 c to + 85 c e = disable to tristate tape and reel h = rf7 bulk a = b04 (xo63, xo62, xo61) c = d06 (xo57, xo37, xo27, xo17) na = no additional options 60 = 45/55 symmetry 4m = 4 mhz 40m = 40 mhz 100m = 100 mhz 12m288 = 12 288 mhz contact factory for all other options m is used as decimal place holder in frequency example: xo57ctecna40m part marking line 1: m2804xxxxx (part number) line 2: xx.xxxxm (frequency) line 3: yywwvv (date/factory code)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
